How to Obtain Accurate PC Time from a NTP Server - By: David Evans, Posted on: 2008-05-21

PC's are notoriously poor at keeping time. I am sure the you have probably noticed the time on your PC drifts away from the correct time by a number of seconds or even minutes each day. This is because real-time clock chips, used in modern PC's, use similar components to every-day clocks and watches and are just as prone to drift away from the correct time. However, there are things that you can do to maintain accurate time on your PC. This article discusses ways in which you can maintain continuously accurate system time on your computer system. It looks at how Internet time references and NTP servers can be utilised for computer time synchronisation.

There are a large number of Internet based time references that use the Network Time Protocol (NTP) to synchronise time clients. NTP was developed over twenty-five years ago at the University of Delaware by Dr D. Mills, it remains one of the oldest protocols in constant use. The protocol was developed to provide accurate synchronisation of time between time servers and clients. Internet based NTP servers synchronise their time to accurate external reference clocks, such as GPS, national radio time standards or precise atomic clocks. Precise time is then disseminated around the network for the purpose of synchronisation.

Most present day computer operating systems have the ability to synchronise time with an accurate internet based NTP server. Linux, Unix, Microsoft Windows XP/2000/2003/Vista and Novell all have routines for NTP time synchronisation. For the most part, the only configuration that is required is to enter the IP address or domain name of an Internet or Intranet based NTP server.

The Microsoft Windows operating systems allow entry of a NTP server into the 'Internet Time' tab of the 'Time Properties' applet. Periodically, the NTP server will be contacted to obtain time and perform synchronisation.

The Linux and Unix operating systems have a NTP daemon available from the NTP web site at 'ntp.org'. The NTP daemon can be configured to otain time from other NTP servers or act as a server in its own right. The 'ntp.conf' configuration file contains a list of servers that can be contacted. Simply enter the IP address or domain name of a NTP server in the list.

To maintain accurate time on a computer system using NTP is very straightforward. However, there are many other more advanced features of the NTP protocol. There are security and authentication facilities that allow a server to limit client access and a client to authenticate a server. Additionally, there are numerous reference clock drivers available to synchronise NTP with a precise external reference - providing a full-blown NTP server installation.

To conclude, computer systems provide notoriously poor time keeping hardware. Without help, standard time keeping devices are just not up to the task of providing system-wide time synchronisation. The solution is to use the NTP protocol and get your computers synchronised to some of the most accurate clocks in the world.

Article Source: http://articlevally.com

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated